Gas-to-gas shell-and-tube heat exchanger
Corrosion at the cold end? Cracks in the tube sheet? We build gas-to-gas heat exchangers that last.
Did you know that a shell-and-tube heat exchanger with gas on both sides often achieves a heat transfer coefficient of only 5 to 35 W/m²K? By comparison, water/water is in the range of several hundred to thousands of W/m²K. That is why gas-to-gas heat exchangers are large, expensive, and highly sensitive to any weakness in design and manufacturing.
In a gas-to-gas heat exchanger, a hot process gas or exhaust gas transfers its heat through the tube wall to a colder gas—without the two streams mixing. The typical design is a shell-and-tube exchanger: one gas flows through the tubes, the other through the shell side, usually in counterflow.
At Kraps, we manufacture gas-to-gas heat exchangers as new builds, as 1:1 replicas, and as optimized replicas—for operators who need a replacement and for plant engineers looking for a reliable apparatus manufacturer.
Wherever a hot gas needs to heat up a cold gas
- Sulfuric acid plants: hot, intermediate, and cold heat exchangers (cold reheat) in the contact section, as well as SO₃ coolers—here, gas-to-gas heat exchangers control the temperatures at the catalyst beds and thus conversion and emissions
- Exhaust gas cleaning: raw-gas/clean-gas heat exchangers in thermal afterburners and exhaust air treatment systems
- Flue gas treatment: reheating flue gas upstream of DeNOx/SCR catalysts or downstream of scrubbers, e.g. in waste incineration and power plants
- Industrial furnaces and dryers: recuperators for preheating process air
- Combustion air: For preheating combustion air, you can find all details on our air preheater page
Do you work in chemicals, petrochemicals, metallurgy, or power generation? You can find more about your industry under Sulfuric acid, Chemicals and Waste incineration.
In use at



Replica, optimization, or new build—you decide
Many gas-to-gas heat exchangers have been in operation for decades. The original manufacturer no longer exists, the drawings are incomplete—and the shutdown has already been scheduled. This is exactly where we come in:
- Replica without modifications: We replicate your unit based on drawings or on-site measurements. Connection dimensions, nozzle positions, and installation remain identical—installation without modifications to piping or foundations.
- Replica with optimization: We analyse the damage pattern and implement targeted improvements: different material at the cold end, modified gas routing, a more robust tube-sheet design. We keep the installation dimensions wherever possible.
- New build to your specification: Are you a plant engineer or licensor and have the thermal design? We take care of design, strength calculations, and manufacturing—on schedule and ready for acceptance.
By the way: If only part of the unit is worn, we also assess whether a replacement tube bundle or a new cold end is more economical than a complete replacement.
Gas-to-gas shell-and-tube heat exchanger request
Do you have a specific project or questions?
Our team will be happy to advise you and create a customized offer.
"*" indicates required fields
















